Dr Francisco Riba — Madrid, Spain

Full Facial Matrix: multiple custom facial implants

A single patient-specific plan in which multiple facial implants — forehead, cheekbones, midface, chin and jawline — are designed together with advanced 3D technology so that each region supports the others.

The objective is not to add as many implants as possible. It is to identify which regions of the facial skeleton are genuinely deficient and to correct them in proportion to one another, in one surgery or in planned stages.

Multiple facial implants Full face planning Custom 3D design Facial harmony Madrid, Spain Video consultation
Full Facial Matrix plan with multiple custom facial implants designed in 3D by Dr Riba in Madrid
Full face planning

What is the Full Facial Matrix?

The Full Facial Matrix is Dr Riba’s approach for patients who may benefit from implants in more than one facial region. Instead of planning a chin implant, a jaw implant and a cheek implant as unrelated procedures, the whole facial skeleton is analysed and the implants are designed as a coordinated set.

Depending on the anatomy, the plan may involve two regions — for example the chin and the jawline — or extend across the upper, middle and lower thirds of the face. Where appropriate, adjacent implants can be designed to meet smoothly, creating a continuous contour rather than isolated points of projection.

The aim is overall facial balance: projection that is coherent between regions, symmetry across both sides of the face and a result that still looks like the patient.

More implants do not mean a better result. Many patients assessed for a full-face plan finally need only one or two regions treated. The number of implants is determined by the anatomy, not by the name of the procedure.

Treatment options

Common combinations of facial implants

Dr Riba analyses the face in upper, middle and lower thirds. The combination is defined by which regions are structurally deficient and how they relate to each other. Each region has its own dedicated page with more detail.

01 Chin and jawline

The whole lower third is treated together, with separate chin and jaw angle implants or a continuous wraparound design. See chin implants and jaw angle implants.

02 Cheekbones and jawline

Midface and lower-face projection are balanced together to improve definition from the front and in three-quarter view. See cheek implants.

03 Cheekbones and chin

A frequent combination when the midface and chin are both under-projected and the profile lacks support.

04 Forehead and midface

The upper two thirds are treated together when the forehead, brow region and cheekbones are recessed. See forehead implants.

05 Three-level facial plan

Upper, middle and lower thirds are designed on the same 3D model. This is reserved for patients with a genuine global skeletal deficiency.

06 Replacement of previous implants

Several existing standard implants that are displaced, visible or disproportionate may be removed and replaced with a coordinated custom design.

Indications

When may multiple facial implants be considered?

A combined plan may be considered when the concern involves the relationship between several facial structures rather than a single area. The following points are not separate diagnoses, but common reasons why a patient may request assessment.

01 Global under-projection

The face appears flat or recessed across several regions, so correcting one area alone would leave the rest looking disproportionately weak.

02 Imbalance between facial thirds

A strong lower face with a flat midface, or the opposite, can make the face look unbalanced even when each region seems acceptable on its own.

03 Asymmetry in several regions

Developmental conditions, previous trauma or earlier surgery may produce asymmetry that affects the forehead, cheekbone, jaw or chin on the same side.

04 Poorly defined lower face

A weak chin combined with a poorly defined mandibular border often requires chin and jawline to be planned as one unit rather than separately.

05 Facial proportion

Forehead, cheekbones, nose, chin and jawline are assessed together so that no single region dominates the face after treatment.

06 Revision planning

Previous implants, fillers or facial surgery in several areas have produced an unsatisfactory contour, asymmetry or an unnatural appearance.

Clinical assessment

How Dr Riba assesses the whole facial skeleton

A combined plan is not indicated simply because the patient would like several areas to look stronger. The decision is based on skeletal structure, proportion between facial thirds, symmetry, soft-tissue thickness and the patient’s realistic objectives.

In some cases a multi-region implant plan is the most appropriate option. In others, a single implant, orthognathic surgery, facial fat grafting or a soft-tissue procedure may be safer or more accurate.

Facial thirds Upper, middle and lower thirds are compared to identify which regions are truly deficient.
Bite and jaw position When the problem is the position of the jaws or the bite, jaw surgery may be preferable to implants.
Soft tissue and skin thickness Thicker tissues can soften skeletal changes; thinner tissues can make implant edges more noticeable.
Realistic surgical objective The aim is proportion and balance, not maximum projection in every region.
Whole-face skeletal assessment for multiple facial implants with Dr Riba
Advanced 3D planning

Designing several implants as one framework

When several regions are treated, the key challenge is not each implant individually but how they work together. CT-based 3D planning allows all implants to be designed on the same virtual model of the patient’s skull, so that projection, symmetry and transitions can be checked across the whole face before surgery.

Planning also defines surgical access, the order in which implants are placed and, where adjacent implants meet, how they connect to form a continuous contour.

Whole-face analysis Proportions between facial thirds, left–right symmetry and profile are studied before any single implant is designed.
Coordinated design Each implant provides only the projection required, so that no region dominates the rest of the face.
Surgical sequence Access routes, placement order, fixation and whether to operate in one or more stages are decided in advance.
Before & after

Multiple facial implants before and after

This case shows a combined chin and jawline plan designed in 3D, seen from the frontal, three-quarter and profile views. Treating both regions together allows the lower third of the face to be redefined as a single continuous contour.

Results vary depending on skeletal anatomy, soft-tissue thickness, implant design, healing and the number of regions treated.

Combined custom chin and jawline implants before and after, frontal view – Dr Riba
Combined custom chin and jawline implants before and after, three-quarter view – Dr Riba
Combined custom chin and jawline implants before and after, profile view – Dr Riba

Before and after cases are informative and should not be interpreted as a guaranteed result.

Medical explanation

How custom 3D facial prostheses are designed

In this video, Dr Francisco Riba explains how custom 3D facial prostheses are designed from the patient’s own anatomy, using medical imaging, digital planning and patient-specific surgical design.

When several implants are planned, the same process allows projection, symmetry, transitions between regions and fixation points to be reviewed across the whole face before surgery.

Every case requires an individual medical assessment. Dr Riba offers in-person consultations and video consultations for patients in Spain and international patients.

Benefits

Potential benefits of a combined facial implant plan

The potential benefits depend on the indication and must be assessed individually. In appropriate cases, a coordinated plan can improve facial proportion, definition and symmetry more consistently than isolated procedures.

01 Balanced proportions Each region is corrected in relation to the others, avoiding a strong feature next to a weak one.
02 Continuous contour Adjacent implants can be designed to meet smoothly, for example along the chin and jawline.
03 One main recovery When safe, treating several regions in one surgery avoids repeated anaesthesia and recovery periods.
04 Structural approach The correction is planned at skeletal level rather than relying only on temporary soft-tissue volume.
Treatment process

How a Full Facial Matrix plan is developed

The process varies depending on the number of regions involved, previous surgery or trauma and whether treatment is carried out in one or several stages.

Step 01 Specialist assessment Medical history, whole-face and profile analysis, and definition of realistic objectives for each facial third.
Step 02 CT imaging and diagnosis A CT scan is usually required to study the facial skeleton, asymmetries and any existing implants or fixation.
Step 03 Coordinated implant design All implants are designed on the same 3D model and reviewed together for proportion, symmetry and transitions.
Step 04 Surgery and follow-up Surgery in one or more stages, followed by postoperative reviews adapted to the extent of the plan.
Profile assessment before multiple facial implant surgery with Dr Riba
Clinical judgement

When a full-face implant plan may not be the right option

Facial implants modify skeletal contour. They do not treat skin laxity, wrinkles, soft-tissue ageing, eyebrow position or problems of dental occlusion. When the bite or jaw position is the underlying problem, orthognathic surgery may be more appropriate than implants.

Some patients may be better served by a single implant, facial fat grafting, lower eyelid surgery, facelift surgery or a combined plan with soft-tissue procedures.

A safe and realistic indication is essential. The aim is to recommend the most appropriate treatment pathway, not the largest number of procedures.

One surgery or staged

Can multiple facial implants be placed in one surgery?

In many cases, implants in different facial regions can be placed during the same operation. This allows a single anaesthetic and one main recovery period, and lets the surgeon check the relationship between regions in theatre.

In other cases a staged approach is safer or more predictable — for example when the plan is very extensive, when previous implants must first be removed, or when the result in one region should be assessed before designing the next.

The choice of material — medical-grade silicone, porous polyethylene, titanium, PEEK or other options — is made for each region according to indication, design, stability, tissue coverage and surgical access.

The decision between one surgery and staged treatment depends on the extent of the plan, general health, previous surgery and the patient’s travel and recovery circumstances.

Multiple custom facial implants placed in one surgery or in stages by Dr Riba
Recovery

Recovery after multiple facial implant surgery

Recovery depends on how many regions are treated, the surgical access used and the individual healing response. When several regions are treated together, swelling is usually more pronounced and takes longer to settle than after a single implant.

First days Swelling and bruising

Swelling, bruising, tightness, discomfort and temporary numbness are expected and may affect several areas of the face at once. With intraoral incisions, hygiene and diet instructions must be followed carefully.

First weeks Progressive improvement

The combined contour becomes clearer gradually as swelling reduces. The final result should not be judged too early.

Follow-up Clinical reviews

Reviews assess wound healing, sensation, implant position and symmetry across all treated regions.

Patients travelling from the UK, the US or elsewhere should receive personalised guidance about travel timing, length of stay, postoperative care and follow-up. A video consultation with Dr Riba can be requested before organising the trip.

Medical information

Risks and limitations of multiple facial implants

Treating several regions means working close to several groups of nerves, blood vessels, muscles and soft tissues. Each treated region carries its own specific risks, and a longer operation has implications for anaesthesia.

Possible risks include infection, bleeding, haematoma, asymmetry, implant displacement, changes in sensation, nerve injury, persistent swelling, contour irregularities, visible or palpable edges, scarring, dissatisfaction with the result, anaesthesia-related risks and the possible need for revision or removal of one or more implants.

This page provides general information and does not replace a medical consultation. The indication, number of implants, materials, expected result, surgical risks and recovery plan must be assessed individually by Dr Riba.

Patient experience

Patient experience and verified reviews

Verified reviews from patients who underwent combined facial implant procedures with Dr Francisco Riba. These reviews have been translated from Spanish while preserving their original meaning.

★★★★★

“If you are looking for the best in personalised facial surgery, Dr Riba is the answer. I had 3D planning for cheekbones and chin, and the result has a level of precision that you do not achieve with conventional implants. He is a true pioneer in this field and having him here is a privilege. The digital planning he performs is on another level. I felt very safe in his hands and in his operating theatre. He also has a great supporting medical team.”

A.G. Verified patient · Translated from Spanish · Top Doctors · 26 December 2025
★★★★★

“My name is Roberto Arias, I am a Mexican citizen, and I visited Dr Riba for a cheekbone and chin implant procedure last December. My experience at the clinic with Dr Riba and his team was incredible. I received humane, kind, professional, technical and specialised care. Dr Riba and his entire team made me feel confident and safe. The results of my surgery are better than I had dreamed. I will return this year, this time for rhinoplasty.”

Roberto Arias Google review · Translated from Spanish

Reviews are individual patient experiences. They should not be interpreted as a guarantee of surgical outcome. Each case requires individual diagnosis, planning and informed consent.

Frequently asked questions

Questions about multiple facial implants

These answers provide general information only. The final indication depends on an individual assessment with Dr Riba.

01 What does “Full Facial Matrix” mean?

It is the name Dr Riba uses for a coordinated plan in which implants for several facial regions are designed together in 3D, rather than as separate, unrelated procedures.

02 How many facial implants can be placed at once?

There is no fixed number. It depends on the regions that need treatment, surgical access, operating time and general health. Some plans are better divided into stages.

03 Is it better to have all implants in one surgery?

A single surgery means one anaesthetic and one main recovery, but it is not always the safest or most predictable option. The choice is made individually after assessment.

04 Which combinations are most common?

Combinations of the midface (cheekbones or infraorbital region) with the jawline and chin are frequent. Forehead augmentation may be added when the upper third is also deficient.

05 Can chin and jaw implants be done together?

Yes. Chin and jaw angle implants are often planned together, either as separate implants or as a continuous wraparound design, to redefine the whole lower third of the face.

06 Is this the same as jaw surgery?

No. Implants add contour over the bone without moving it. Orthognathic surgery repositions the jaws and is indicated when there is a bite or skeletal position problem.

07 Is recovery longer with several implants?

Swelling is usually more pronounced and takes longer to settle than after a single implant, because several areas of the face are healing at the same time.

08 Do multiple facial implants look natural?

They can look natural when each implant is proportionate to the others and to the patient’s own anatomy. Overcorrection in several regions at once is what usually creates an artificial result.

09 Can existing facial implants be replaced as part of the plan?

Yes, when clinically appropriate. Existing implants are studied on the CT scan and may be removed and replaced with a coordinated custom design.

10 I live in the UK or the US. How does the process work?

Many international patients start with a video consultation and send their imaging in advance. The length of stay in Madrid depends on the extent of surgery and follow-up required.

11 Who is a good candidate for multiple facial implants?

Usually a patient in good general health, with realistic expectations and a structural deficiency affecting more than one facial region. Smoking or uncontrolled medical conditions may affect suitability.

12 How much do multiple facial implants cost?

Cost depends on the number of regions, imaging, implant design and material, operating time, anaesthesia and facility. A personalised quotation is provided after assessment.

The cost of multiple facial implants or a full-face implant plan depends on the number of regions treated, diagnostic planning, implant design, surgical setting and whether treatment is staged. A personalised quotation is provided after assessment.

Specialist expertise

Why choose Dr Francisco Riba for a full-face implant plan?

Dr Francisco Riba is an oral and maxillofacial surgeon with experience in custom 3D facial implants, orthognathic and facial skeletal surgery and advanced digital planning.

Treating several regions of the face requires an understanding of the whole facial skeleton — and of when implants are not the right answer. This allows implants, jaw surgery or soft-tissue procedures to be compared honestly for each patient.

The objective is proportion, not volume. Dr Riba assesses which regions are truly deficient and whether a combined plan, a single implant, another treatment or no surgery is the most appropriate option.

01 Whole-face skeletal analysis

Planning starts with the entire facial skeleton, not with the region the patient first notices.

02 Coordinated 3D design

All implants are designed on the same model so that projection and transitions remain coherent across the face.

03 In-person or video consultation

Patients in Spain and international patients can request an initial consultation pathway before deciding whether to travel to Madrid.

Multiple facial implants consultation with Dr Riba in Madrid Spain
Request assessment

Request your personalised assessment

Send your initial information and Dr Riba’s team will help guide you towards the most appropriate consultation pathway for a full-face or multi-region facial implant plan.

Patients can request an in-person consultation in Madrid or, when appropriate, a video consultation with Dr Riba before travelling to Spain.



    Include your country code, e.g. +34, +44, +1.